A few MCT Switchable have been made again. After some time of listening with the MCT Switchable, I would not be without him. The combination with the Ortofon SPU Classic on the SME 3012-R is simply outstandingly good. A more detailed description can be found here. Link
This MC transformer can only be manufactured non-regularly in very small quantities, I keep a waiting list for interested customers.
Some weeks ago Jaap Pees from Hanze Hifi sent me these pictures of a restored Garrard 301. The Garrard is beautifully restored and, as the measurement results show, with a perfect result. Nonetheless, it is noticeable that after the installation of the Kokomo Kit 301 Mk3, the wow&flutter is improved by about 50% compared to the original thrust bearing.
There is now a new connector kit for the SME 3009/3012 tonearms, as well as for the SME M2/9 and M2/12 tonearms available. The new 5-pin kit horizontal is the optimal solution for turntables with a limited height and therefore no room to plug the connectors from the bottom. This solution needs only a depth of 65mm. Another advantage of this solution is, that the tonearm can be operated both fully balanced and unbalanced. The operating mode depends only on the configuration of the phono cable.
I did it again and build a small batch of these fantastic “MCT switchable”. These MC-transformer can switched between low and high impedance and is with these features more compatible to MC-cartridges. Only one “MC switchable” is left and available!
It should be a very “normal” Sun Audio triode amp, which can be operated with 2A3 and also with a 300B as power triodes, as I have built it many times before. But then all came differently! Carsten Bussler had the idea that he would like to use his collection of 2A3H. At this time the power amp was already completely assembled, tuned and played perfectly. Then the new journey with the 2A3H started! It was not so easy to integrate these power triode into the Uchida. More details and pictures can be found on the blog of Carsten Bussler – 2A3 Maniac strikes back
Actually I had already planned to buy a new tonearm, but then I remembered again the website of Mr. Graetke. I was a bit sceptical, but after the first phone call my doubts were gone. Very competent, friendly and fair, I felt I was in good hands there. Now the tonearm has been tuned, remounted and the tonearm cable has been installed and it only remains to say: great cinema, my expectations have been exceeded by far! It is not necessary to go into detail at this point, because the tonearm is now better in all details. Price/performance: Mr. Graetke’s work and the resulting sound are worth every cent. I can only recommend every doubter to contact Mr. Graetke and let his knowledge and craftsmanship flow into his own tone arm.
Product(s): Service für SME 3009 Series 2 improved, Bronze-Schneidenlager Mk3, Pure Silver Hair Wire